(0255) 6 28 28 28



Epoxy adhesive blow out pump

BAP-M blow-out pump is used for blow out the dust and debris from the drilled holes. With the 360° circumgyrate air-out pipe, it is easy to clean the drilled hole in any direction manually. WDB offer 3 sizes of blow-out pump. Each of them is light and easy to use. BAP-M blow-out pump is suitable for medium size of drilled hole.

Specification of BAP-M blow-out pump

  • Item No.: BAP-M
  • Air Pressure: 5KG
  • Revolving air flow pipe device
  • PVC Quality body
  • Length of body: 280mm
  • Length of pipe: 330mm

Standard Packing

  • One piece in PE bag
  • 24pcs per carton
  • Other packing requirements, please check with us.

How to install chemical anchor?

1. Drill the specific hole size and depth. 2. Clean dust with brush and air blow pump. 3. Press out unmixed resin which can’t be used. 4. Inject mixed resin into drilled hole and fill from the bottom. 5. Insert rebar/threaded rod/steel strip. Curing time refer to TDS. Don’t touch until full curing. The installation process will affect the bonding performance of chemical anchors.