(0255) 6 28 28 28

400ML DUAL COMPONENT MANUAL CAULKING GUN

WDB-G-1012

Caulking applicator chemical gun

Double-gripping plate technology, increased efficiency, quick job done easier, neater and with less hassle, 400ml cartridge longer dispensing tool, ergonomically designed composite construction.

400ml epoxy chemical anchor caulking gun

Epoxy chemical anchor mostly is with bigger volume which required heavy duty caulking gun. The caulking gun quality is crucial when the cartridge size is bigger and in cold weather application that require more energy to squeeze. A good tool is easy to use and non-drip.

Specification of WDB-G-1012 400ml dual component manual caulking gun

  • Item No.: WDB-G-1012
  • For 400ml side by side tube
  • Color: Blue
  • Cartridge ratio: 3:1
  • Thrust ratio: 25:1
  • Handle: Aluminum Alloy
  • Trigger: Metal
  • Carriage: Metal
  • Suitable for WDB 400ml cartridge of Pure Epoxy.

WDB-G-1012 chemical anchor caulking applicator provides efficient work with double gripping

  • Steady quality with competitive price
  • Easy installation and operation
  • Energy save design
  • High quality for long-term using
  • Anti-drip
  • Press the trigger for short time pause or pulling out the steel arm

Storage and re-use

  • Store the caulking gun with the plunger head fully retracted.
  • Clean off any spills or leaks immediately to maximize the life of the gun.

Standard Packing

  • 12pcs per carton
  • Carton dimension: 37x31x27.5cm(H)
  • N.W.: 14.4KGS
  • G.W.: 15KGS
  • Other packing requirements, please check with us.

How to use a caulking gun?

1. There is a small trigger on the back of the caulking gun. Press the release trigger with your thumb. This will loosen the long steel rod that runs through the entirety of the frame. 2. Pull the plunger all the way back. 3. Remove the white cap and plug of tube and then screw the mixer nozzle on to the tube. Insert the flat end of the tube into the back of the gun first and put the tube with the mixer nozzle in the front. Pull the handle trigger to move the plungers of caulking gun. Make sure that the plungers of caulking gun are in the center of tube pistons. It is very important to put the tube in the correct position.