380ML COAXIAL CARTRIDGE CAULKING GUN
WDB-G-1010
Coaxial chemical anchor gun
380ml is a device designed for hand held operation by one individual. Applied with a standard-style 380ml coaxial cartridge of 10:1 mix ratio. Iron barrel with heavy-duty aluminum handle and trigger. Special handle, easy to pull.
Co-axial chemical anchor cartridge caulking gun
This type is for 650ml ratio 1:1 and 600ml ratio 1:1 epoxy chemical mortar. A good caulking gun can last longer and save cost. It’s our best sell dual gun as the high quality and suitable for most glue brands in the market.
Specification of WDB-G-1010 380ml coaxial cartridge caulking gun
- Item No.: WDB-G-1010
- For 380ml and 410ml coaxial tube
- Color: Red
- Thrust ratio: 25:1
- Handle: Aluminum Alloy
- Trigger: Metal
- Carriage: Metal
- Suitable for WDB 380ml cartridge of polyester resin, epoxy acrylaye and vinylester.
WDB-G-1010 coaxial chemical anchor dispensing gun is made by high level metal
- Steady quality with competitive price
- Easy installation and operation
- Energy save design
- High quality for long-term using
- Anti-drip
- Press the trigger for short time pause or pulling out the steel arm
How to install chemical anchor?
1. Drill the specific hole size and depth. 2. Clean dust with brush and air blow pump. 3. Press out unmixed resin which can’t be used. 4. Inject mixed resin into drilled hole and fill from the bottom. 5. Insert rebar/threaded rod/steel strip. Curing time refer to TDS. Don’t touch until full curing. The installation process will affect the bonding performance of chemical anchors.
Standard Packing
- 12pcs per carton
- Carton dimension: 49x29x23cm(H)
- N.W.: 12.6KGS
- G.W.: 13.2KGS
- Other packing requirements, please check with us.
